ImSim Talento was developed to be the ultimate affordable, durable and best-performing solution.
Talento Throttle and brake
- Provides up to 160kg/353lbs of on-foot braking force measured by a 200kg/440lbs load cell. (2 pedal set includes elastomers for a maximum of 100kg/220lbs of on-foot force, the extra ImSim TALENTO Performance Kit provides dozens of extra configurations with a wide range of travel and force for up to the top foot-force of 160kg/353lbs) - Built with high-quality laser-cut, vibratory tumbled stainless steel. - The integral use of self-locking nuts for optimal performance, for 24h, 48h or 72h stints without change in rigidity or system integrity. Also avoids any maintenance (bench-tested for 23 days consecutively at 200kg/440lbs foot force (2 million cycles). - Uses automotive grade position sensors. - True-to-life torsion-sprang throttle. - The throttle features a unique tool-less mechanical solution for changing between different force curves and 3 click cam-driven pre-load settings. All interchangeable in under 1 second. - ImSim Software allows users to create, store and share different configuration profiles (useful for different racing categories/simulation games or user preferences). - Designed to fit most commercial simulator chassis with its compact design, from off-the-shelf home systems to purpose-built professional simulators. ImSim TALENTO Sim Pedals can be installed on ImSim’s Universal Interface Plate and can also be attached directly to the aluminium profile. - Can be installed upright and inverted. - Pedal plates are designed for ultimate sim-racing performance, even for drivers wearing socks only. This is possible with ImSim TALENTO’s wide smooth surfaces that allow users to use its full braking force as well as to slide on and off the throttle without pain or discomfort even in long stints. - No sliding locks are used to avoid unwanted configuration changes while driving. All the following pedals’ adjustments have individual and un-skippable positions for optimal reliability: Angle / Brake faceplate height / Force profiles / Pedal travel - Industry-leading pedal feel endorsed by professional racing drivers. Single or multi-staged force on the brake pedals to simulate pad-to-disc gap, as well as several different stiffnesses and pedal travel lengths. - Avoid elastomer failure with included custom-designed machined parts that mechanically stop rubbers from deforming beyond factory specified infinite lifetime working range (tested over 2 million braking cycles). - Constant force performance, even under a quick and constant succession of actuations and/or elastomer temperature variations. - Industry-leading rigidity with near-zero mechanical clearance maintained throughout the product’s lifetime. - Quiet mechanical hard stops were designed for the best reliability, both the system integrity and sensor and electronics protection. - Carefully designed shape for optimal rigidity and different stainless-steel thicknesses for optimal performance and reliability, with zero permanent deformation guaranteed if used within the specified force limits advertised. - Electronics are enclosed and protected in the brake pedal, with discreet streamlined plugs for Throttle and Clutch connections, as well as to the PC with a single USB A-B cable. - Modular design that allows users to purchase a top-of-the-line system that can be upgraded with a clutch and more features with its performance kit upgrade at a later stage. - An extra brake plate is provided, symmetrical to the clutch pedal plate, for a more compact and true-to-life design, especially for manual transmission cars. It has eight fixation holes for extra brake plate positioning adjustability. - The package includes one A-B 1.8m long USB cable, as well as all tools, bolts and nuts necessary for their installation and adjustments. - The throttle has a maximum force of 12kg/26lbs
Talento Clutch
- It is designed to simulate the feeling of engaging and disengaging a physical clutch, but it was also engineered to allow for different maximum force and pedal travels, as well as how pronounced the “clutch bite” simulation is, providing the user with a more linear feeling if such is desired. -It features a unique tool-less mechanical solution for changing the force curve and 3 click cam-driven pre-load settings. All interchangeable in under 1 one second. - Can be installed upright and inverted. - The Clutch has a maximum force of 18kg/40lbs - Built with high-quality laser-cut, vibratory tumbled stainless steel. - Uses automotive grade position sensors. - No sliding locks are used, to avoid unwanted configuration changes while driving. All the following pedals’ adjustments have individual and un-skippable positions for optimal reliability: Angle / Brake faceplate height / Force profiles / Pedal travel - Industry-leading rigidity with near-zero mechanical clearance maintained throughout the product’s lifetime. - Quiet mechanical hard stops were designed for the best reliability, both system integrity and sensor and electronics protection. - Carefully designed shapes for optimal rigidity and different stainless-steel thicknesses for optimal performance and reliability, with zero permanent deformation guaranteed if used within the specified force limits advertised. - The package includes one A-B 1.8m long USB cable, as well as all tools, bolts, and nuts necessary for their installation and adjustments.
Talento Performance Kit
- Get your true talent reflected on your lap times by getting to your peak brake pressure faster with shorter pedal travels, as well as making it easier to master the art of threshold braking (just before activating ABS), high down-force bleed-off braking (high-pressure initial braking and bleeding off as grip drops as aerodynamic downforce on the tires reduces) and trail braking (controlling car rotation and weight distribution with the brakes while turning), by using higher foot forces and controlling your cars’ brakes with muscle memory, rather than typically very misleading foot position. - Improves the brake pedal to its maximum force and travel range, including several diverse elastomers. From sensitive road-legal conventional cars (full travel at a maximum 30kg/66lbs), extreme formula braking (very short pedal travel at 140+ Kg/ 310 lbs) or even very popular sim racing series such as GT3 class cars (larger pedal travel at around 120 kg/ 265lbs). - This product includes multiple elastomers and purpose-made machined stainless steel elastomer spacers, for dozens of different combinations of single and multi-staged braking forces. - Avoid elastomer failure with included custom-designed machined parts that mechanically stop rubbers from deforming beyond factory specified infinite lifetime working range (tested over 2 million braking cycles). - Braking maximum force amplified to 160kg/353lbs on foot. - Lower-force 30kg/44lbs foot force full travel braking allowed by an extra elastomer designed for special use-cases such as preschoolers, injured or in recovery or handicapped drivers. - Throttle pedal face guard for long stints, keeping the driver’s foot on the pedal and avoiding incidents such as getting stuck on the simulator’s chassis or slipping out by using low-grip footwear such as socks. - Rear brake pedal-face guard to prevent losing time while driving manual geared cars by getting a foot stuck between the throttle and the brake.
